left_bottom_img.gif
Sumitomo Fusion Splicer T-39
Enquire for price
Enquire

Sumitomo Fusion Splicer T-39

Advanced electronic design with added convenience and functionality. The industry's first dual independent heat shrink ovens enabling highly efficient operation, auto splice and heater start functions. Unique fibre clamping system can help make splicing more efficient and successful.
New low power saving and eco-friendly design with pollutant-free materials for the global environment.

Product name TYPE-39
Optical fibre requirements Material Silica glass
Profile types SMF (ITU-T G.652), MMF (ITU-T G.651), DSF (ITU-T G.653), NZDSF (ITU-T G.655) and other SMF including ITU-T G.657 fibres
Fibre count Single
Cladding diameter 80µm~150µm
Coating diameter 100µm~1,000µm
Cleave length 8~16mm for fibre coating diameter up to 250µm, 16mm for fibre coating diameter over 250µm
Standard performance Splice loss (Typical) SMF: 0.02dB, MMF: 0.01dB, DSF: 0.04dB, NZDSF: 0.04dB (With Sumitomo identical fibres)
Return loss More than 70dB
Splice cycle time Approx.9 seconds (Quick Mode)
Heat shrink oven cycle time 40mm protection sleeve: Approx.35 seconds, 60mm protection sleeve: Approx.40 seconds (2 ovens can be operated simultaneously.)
Splice & heat cycles per fully charged battery Approx.120 (with BU-66S), Approx. 250 (with BU-66L) *1
Fibre view and magnification Two CMOS cameras observation
300X for or Y single axis view, 150X for both X & Y dual axis view.
Functions Loss estimation Provided
Attenuation splicing 0.1dB to 15dB in 0.1dB increments (High precision attenuated splice made by intentionally offsetting the left and right fibre cores)
Splice data storage 10,000 splices
Proof test 1.96N (200gf)
Arc environment calibration Provided
V-groove white LED illumination Provided

  • *1: This number is not guaranteed. 3 minute splice and heating cycle is repeated with a new fully charged battery in room temperature. Splice & heat cycles may vary depending on the operating environment.
  • *2: Electrode life is not guaranteed. This number may vary depending on the operating environment.
  • Type-39-LC for loose buffer fibre and Type-39-FH (fibre holder type) are also available. For more information, please contact us.

For more information click here

Some equivelent product options

Fibre Cleaver Fujikura CT-30

Fibre Cleaver Fujikura CT-30

Fibre Cleaver Fujikura CT-30

Enquire for price
Fibre Optic Identifier

Fibre Optic Identifier

Fibre Optic Identifier - OFI-3

Enquire for price
Optical Fibre Ranger - FHP3A01

Optical Fibre Ranger - FHP3A01

FHP3A01

Enquire for price
  • Phone: 0508 10 10 30
  • Email: sales@cable-ways.co.nz