The Fibre Optic Identifier(OFI-3) is a low cost, portable instrument designed to detect optical signals without disrupting traffic. Based on non-destructive macro bending technology, the FOSOFI-3 does not disrupt traffic, damage or overstress the fiber, enabling efficient, accurate and reliable data acquisition. During maintenance, installations, rerouting or restorations, it’s often necessary to isolate a specific fiber. By simply clamping the FOSOFI-3 onto a fibre, it will indicate if there is a signal, a Modulated Signal, or traffic and show signal direction.
Features:
- Detect a variety of optical tones, 270Hz, 1kHz and 2kH
- Powered by 2 units of 1.5V AA alkaline batteries
- RB0.25mm, RB0.9mm, RB3.0mm plungers available
Specifications: |
|
Recognisable wavelength range |
900 to 1650 nm |
Recognisable signal type |
CW, 2kHz, 1kHz, 270Hz ± 5% |
Detector type |
InGaAs 2pcs |
Clamp type |
H0.9/0.25 for bare fibres, H2.5 for jacketed fibres |
Sensitivity@1310 nm |
+11dB to -20dBm (Continuous Wave) |
|
+11dB to -10dBm (Modulated Signal) |
Sensitivity@1550 nm |
+11dB to -30dBm (Continuous Wave) |
|
+11dB to -18dBm (Modulated Signal) |
LED Indicator |
Signal traffic, signal frequency(2kHz/1kHz/270Hz) |
|
Signal intensity (5 grades), low battery |
Operating temperature |
-10 to +50°C |
Storage temperature |
-20 to +70°C |
Power supply |
1.5V AA batteries 2pcs |
Dimension (mm) |
202L x 62W x 36H |
New weight |
270g |
*
This is not the full range - please contact us for your Fibre Optic requirements